One number, three units

Spine width calculator

Spine width is page count multiplied by paper thickness. Enter the two numbers and get inches, millimeters, pixels at 300 DPI, and the full-wrap size that follows.

KDP: 0.002252 in per page on white, 0.0025 in per page on cream.

Spine inputs

Use the final interior page count, not the manuscript page count.
Build the full cover with this spine
Spine width
0.800 in
20.32 mm · 240 px @300dpi
Full width13.050 in
Full height9.250 in

The formula

Spine width = page count × paper thickness. KDP publishes two thickness figures for black-ink paperbacks: 0.002252 in per page for white and 0.0025 in per page for cream. Cream is thicker, so the same book is wider on cream.

Example: 320 pages × 0.0025 = 0.800 in. The same book on white paper is 320 × 0.002252 = 0.721 in, a difference of 0.079 in. That is more than the usual cutting tolerance, so do not reuse a cover between paper stocks.

Spine width by page count

PagesWhiteCreamCream in mm
1000.2250.2506.35
1500.3380.3759.53
2000.4500.50012.70
2500.5630.62515.88
3000.6760.75019.05
3500.7880.87522.23
4000.9011.00025.40
5001.1261.25031.75
7001.5761.75044.45

When the spine is too narrow for text

Below roughly 0.25 in there is no usable spine text. A 100-page cream book has a 0.250 in spine; after printing tolerance, a vertical title will look cramped or clip. Leave the spine blank and keep the color flat.

For spines between 0.25 and 0.5 in, reduce the type size and keep the label short: title only, no subtitle, no author. CoverFit hides spine text automatically below 0.18 in.

Put the number to work

The cover maker uses the same formula and draws the spine, back, and front on one wrap.

Open the cover maker