Spec sheet

KDP cover template

A KDP paperback cover is one wrap: back cover, spine, and front cover on a single sheet, plus bleed. The only variables are trim size, page count, and paper stock.

If your spine is wrong, the whole file is wrong. Start from the interior, not from the artwork.

What the template includes

KDP's own template generator produces a PDF with three layers of guides. Understanding them is faster than downloading a template for every page count:

ZoneWhere it sitsWhat belongs there
Bleed0.125 in outside the trim on all four sidesBackground art that should run off the page
TrimThe final cut lineNothing critical, because cutting drifts
Safe area0.25 in inside the trimType, logos, and anything that must survive the knife
Barcode zoneLower-right of the back coverKeep it quiet; KDP prints the barcode there

Dimensions by page count

These are full-wrap sizes for the most common trim, 6 × 9 in. Cream paper uses 0.0025 in per page; white uses 0.002252 in.

PagesSpine (cream)Full wrap (cream)Spine (white)Full wrap (white)
1200.30012.550 × 9.2500.27012.520 × 9.250
2000.50012.750 × 9.2500.45012.700 × 9.250
2800.70012.950 × 9.2500.63112.881 × 9.250
3200.80013.050 × 9.2500.72112.971 × 9.250
4001.00013.250 × 9.2500.90113.151 × 9.250
5001.25013.500 × 9.2501.12613.376 × 9.250

How to build it without a template file

  1. Open the cover maker and set trim size and page count.
  2. Turn on guides to see bleed, trim, and the safe area.
  3. Place artwork so it crosses the bleed on every side.
  4. Keep all type inside the safe area, and leave the barcode corner empty.
  5. Export the PDF and run it through KDP's previewer before uploading the interior.

Build your wrap now

The tool calculates the spine from your page count and paper, then exports a 300 DPI PNG and a print-ready PDF.

Open the cover maker

Template mistakes that get files rejected

  • Using a template from a different page count. A 20-page difference moves the spine by 0.05 in, which is enough to shift the front cover art.
  • Putting type in the bleed. It looks fine on screen and gets trimmed on paper.
  • Designing at 72 DPI. A 13 in wrap at 72 DPI is 936 px wide; KDP wants roughly 3,900 px.
  • Ignoring the barcode. A busy back cover with a barcode dropped on top reads as amateur.